Pro-face PFXGP4501TAA Manuel télécharger pdf (Page 232)

232

When installing the GP unit with the flat mount orientation, affix the

Overlay to

the front of the GP unit.

In advance, align the four corners of the

Overlay outline on the panel as

shown in the figure, and then mark these corners.

Peel off the removable paper layer from the

Overlay, align the Overlay with

the four marks, and then affix the

Overlay to the panel.

1) Locations to mark (four locations)

Overlay outline

e) Display area

Note: Use the

Overlay manufactured by Pro-face. Use one of the following

models.

z PFXZGPFSR6W1 (for the PFXGP4301TADR)

z PFXZGPFSR7W1 (for the PFXGP4401TADR)

z PFXZGPFSR10W1 (for the PFXGP4501TADR)

z PFXZGPFSR12W1 (for the PFXGP4601TADR)

Step Procedure Details

); );





)

(dimensional tolerance: ±0.2mm [0.01 in.])

FX FY

PFXGP4301TADR 84.0 (3.31) 66.0 (2.60)

PFXGP4401TADR 99.7 (3.93) 78.6 (3.09)

PFXGP4501TADR 133.3 (5.25) 105.5 (4.15)

PFXGP4601TADR 158.5 (6.24) 118.7 (4.67)

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 238 239 240

Pas de commentaire

Pro-face PFXGP4501TAA Manuel Page 232